Using The Vacuum Cleaner - Sanyo SC-TA3000 Manual De Instrucciones

USING THE VACUUM CLEANER

1. Attach the floor nozzle and main unit together.
2. Remove the dust container and connect the handle and main unit together.
HANDLE
Insert the handle into the
1
hole in the main unit and
press tightly, as shown.
3. Attach the crevice tool, wand and brush into the tool holder.
CREVICE TOOL
4. Connect the power cord plug to the outlet.
[HOW TO DETACH THE FLOOR NOZZLE]
NUT
2 Insert the bolt and nut
into the bolt hole.
BRUSH
Make sure the power cord plug is tightly
inserted and secured in place.
5
To detach the
floor nozzle, insert
Floor Nozzle
a screwdriver into
Detach Hole
the hole and pull
up while pushing
Lock Button
the lock button.
3 From the back side,
using a screwdriver,
twist and attach the nut
and bolt.
ATTACHMENT HOLDER
WAND
BOLT