Maintenance - Sanyo SC-TA3000 Manual De Instrucciones

Always turn off the on/off switch pedal and unplug the power cord before servicing.
MAIN UNIT • FLOOR NOZZLE • HANDLE
• Using a soft, dry cloth, wipe off dirt from the vacuum cleaner.
• When the vacuum cleaner becomes extremely dirty, soak a soft cloth in water with a
small amount of mild detergent, and wring out well. With the moist cloth, wipe until clean.
• Do not use thinner, benzene, or any type of spray cleaner to clean the unit.
DUST CONTAINER - When dirty from accumulation of dust and dirt particles
• After emptying all dust and debris from the dust container, rinse with cold water. Then,
wipe with a dry cloth and allow to air dry thoroughly before reattaching to the main unit.
ROTATING BRUSHES - When hair and other particles get entangled
(check and maintain the unit once or twice a week)
FILTER
Tap gently to allow dust particles to fall.
• When loss of suction occurs due to extreme dirtiness, tap out dirt and debris, then rinse
with cold water.
1. Rinse with cold water.
NOTE
• Never attempt to machine wash the filter.
• Never use hair dryers, clothes dryers or other heated air devices to dry the filter.

MAINTENANCE

Regular Maintenance
When dirt and debris clog the
rotating brushes, slowly work
your finger around the brushes
to remove any particles.
2. Air dry thoroughly until completely dry.
9