Filling The Rinse Aid Reservoir - EAS ELECTRIC EMD12W3 Manual De Instrucciones

Filling The Rinse Aid Reservoir

1
Remove the rinse reservoir cap by
lifting up the handle .
3
Close the cap after all.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1. Press ON button
2. Press P (Programs) button for more than 5 seconds.
3. Display will show H1. Then, press time delay and the display will show
D1. Press again P (Programs) button and the display will show the
following sequence: D1->D2->D3->D4->D5->D1. More bigger number is,
more you fill with rinse aid.
4. Select with P (Programs) button the setting and it will automaticaly keep
the setting selected.
2 Pour the rinse aid into the dispenser,
being careful not to overfill.
V.2