Tabla de contenido
Publicidad
H
USE
UTILISATION
USO
For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.
CAUTION: DO NOT BLEND HOT LIQUIDS.
ALLOW THE LIQUIDS OR FOODS TO COOL TO ROOM TEMPERATURE BEFORE BLENDING.
CAUTION: THE BLADE ASSEMBLY
IS NOT LOCKED IN PLACE. IF USING
THE POUR SPOUT, ENSURE THE
LID IS FULLY LOCKED ONTO THE
BLENDER PITCHER.
USING THE 72
USE:
OZ. PITCHER
WARNING: NEVER LEAVE THE APPLIANCE
UNATTENDED WHILE IN USE.
(Max Liquid Capacity: 64 oz)
CAUTION: USE CAUTION WHEN HANDLING
NOTE: Ninja
Auto-iQ
®
™
THE BLADE ASSEMBLY AS IT IS VERY SHARP.
Technology can sense
IMPORTANT: MAKE SURE THE MOTOR BASE IS
which jar is on the motor
PLUGGED IN FOR USE.
base. The function
lights will illuminate
1
Press the POWER button to turn on the unit (H).
depending on which
Select the speed or Auto-iQ program that best
container is placed on
suits your needs. The Auto-iQ program will stop the
the motor base.
appliance automatically at the end of the program.
1 2
®
I
CAUTION: THE BLADE
ASSEMBLY IS NOT LOCKED IN
PLACE. IF POURING WITH THE
LID REMOVED, ALWAYS REMOVE
THE BLADE ASSEMBLY FIRST.
NOTE: Pulse ingredients for even chopping by
holding the PULSE button until your desired
consistency is reached.
2
To pause the appliance, press the POWER button or
the selected speed a second time. When the program
is paused, the light on the program button will flash
until you press it again to resume the program.
3
When you have reached your desired consistency,
stop the appliance by pressing the POWER button
and wait for the blades to stop turning.
w w w . n i n j a k i t c h e n . c o m
J
K
REMOVAL
DÉMONTAGE
EXTRACCIÓN
IMPORTANT: DO NOT OVERFILL. TO AVOID
SPILLING, DO NOT ADD INGREDIENTS PAST
THE "MAX LIQUID" LINE.
REMOVAL:
1
Turn the pitcher counter-clockwise and then lift off
the motor base (I).
2
Depending on the consistency of the contents in the
pitcher, open the pour spout cap and use the pour
spout to empty the liquid contents.
3
For thicker consistencies, remove the lid and blade
assembly carefully (by the top of the shaft), then
empty the contents from the pitcher. To remove the
lid, press the release button on the lid (J) and pull the
handle up to a 90° angle. Lift the lid off the pitcher.
4
Make sure the appliance is unplugged when not
in use.
5
To release the motor base from the counter or
tabletop, place your hands underneath both sides
of the motor base and gently pull the unit up and
towards you (K).
Publicidad
Tabla de contenido
