Tabla de contenido
Publicidad
CARE &
CLEANING:
MAINTENANCE
CAUTION: MAKE SURE THE MOTOR
BASE IS UNPLUGGED FROM THE
POWER SOURCE BEFORE INSERTING
OR REMOVING ANY ATTACHMENT AND
BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR
BASE INTO WATER OR ANY OTHER
LIQUID.
CAUTION: HANDLE BLADES CAREFULLY
AS THE BLADES ARE VERY SHARP.
1
Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and
wipe dry.
NOTE: The Stainless Steel Ninja
dishwasher safe.
3
Place the cups, lids, blades, and pitcher or bowl
(optional accessory, not included) in the top rack
of the dishwasher.
4
Carefully hand wash the cups, lids, blades, and
pitcher or bowl (optional accessory, not included)
in warm, soapy water with a soft cloth.
NOTE: If the appliance needs servicing, please
call Customer Service at 1-877-646-5288.
14
STORING:
1
Store the Nutri Ninja with Auto-iQ Blender
upright. Secure the power cord on the back of
the base by wrapping the cord around the cord
wrap. Do not place anything on top of the unit.
Store the cups and the rest of the attachments
where they will not be damaged and won't
cause a hazard.
Cup is NOT
®
OR
w w w . n i n j a k i t c h e n . c o m
®
RESETTING THE MOTOR
THERMOSTAT:
The Nutri Ninja with Auto-iQ Blender features
a unique safety system that prevents damage
to the unit's motor and drive system should you
inadvertently overload the appliance. If the
appliance is overloaded, the motor will stop. To reset
the appliance, follow the resetting procedure below:
1
2
3
4
5
Unplug the appliance from the electrical outlet.
Remove and empty the cup/pitcher/bowl
(optional accessory, not included) and ensure that
no food is jamming the cutting blades.
Allow the appliance to cool for approximately
30 minutes.
Re-install the cup/pitcher/bowl (optional
accessory, not included) onto the motor base and
re-plug the appliance into the electrical outlet.
Proceed with using the appliance as before
while making sure not to exceed the maximum
recommended capacities.
Publicidad
Tabla de contenido
