MICROWAVE OVEN
SAFETY INSTRUCTIONS
Read carefully and save for future use!
Warning: The safety measures and instructions, contained in this manual, do
not include all conditions and situations possible. The user must understand
that common sense, caution and care are factors that cannot be integrated
into any product. Therefore, these factors shall be ensured by the user/s
using and operating this appliance. We are not liable for any damages caused
during shipping, by incorrect use, voltage fluctuation or the modification or
adjustment of any part of the appliance.
To protect against a risk of fire or electric shock, basic precautions shall be
taken while using electrical appliances, including the following:
1. Make sure that the voltage in your outlet matches the voltage indicated on
the device label and that the outlet is properly grounded. The outlet must
be installed in accordance with applicable electrical codes according to EN.
2. Do not operate the oven if the door is damaged, it does not function
correctly or the power cord is damaged.
WARNING: It is dangerous for any person other than trained to
perform any repairs or maintenance to remove any cover that provides
protection against microwave radiation.
All repairs or adjustments including cord replacements shall be
performed by a professional service centre! The cord must be
unplugged from the outlet before repairing. By removing the covers
with power turned on, you may risk exposing the microwave technician
to microwave energy and electrical shock!
3. Protect the appliance from direct contact with water or other liquids to
prevent possible electric shock. Do not immerse cord or plug in water!
4. Do not operate the microwave oven outdoors or in a moist environment
and do not touch the cord or appliance with wet hands. Risk of electric
shock.
5. Pay special attention when using the oven near children.
6. Do not leave the microwave oven running unattended.
7. We recommend not leaving the plugged in oven unattended. Disconnect
the cord from the electrical outlet prior to any maintenance. Do not remove
GB
65