Material Supplied; Installation Dimensions - Whirlpool AKR 037 G BL Manual De Uso Y Mantenimiento

MATERIAL SUPPLIED

Remove all the components from the packets. Check that all the components are included.
• Hood assembled with motor, lamps and grease filters fitted (1 or 2 grease filters, depending on the model).
• Instructions for assembly and use
• 1 Assembly template
• 6 wall plugs Ø 8mm
• 6 screws Ø 5x45
• 2 screw Ø 3.5x7
• 2 washers Ø 16x2
• 1 outlet air grid
• 1 bracket chimney fixing
• 1 VNRF
INSTALLATION - PRELIMINARY ASSEMBLY INSTRUCTIONS
The hood is designed for installation and use in "Extractor version" or in "Filter version".
Extractor Version
Fumes are extracted and expelled to the outside through an exhaust pipe (not supplied) fixed to the hood exhaust pipe connector.
Depending on the exhaust pipe purchased, provide for suitable fixing to the exhaust pipe connector.
IMPORTANT: If already installed, remove the carbon filter/s.
Filter Version
Air is filtered through the carbon filter/s and recycled into the surrounding environment.
IMPORTANT: check that air recirculation is facilitated.
If the hood does not have a carbon filter/s, order one/them and fit it/them before use.

INSTALLATION DIMENSIONS

Adjacent wall units
70 cm (gas or combi cookers)
55 cm (electric cookers)
600 mm min
Adjacent wall units
centre line
GB12
hob surface