Premier SCR-4639USID Manual De Instrucciones página 19

~ You may always cancel your track selection by pressing APS button.
Installation
The unit has anti theft locked box design, please follow the below installation instruction:
1. Push the trim plate against the chassis until it is fitted.
2. Insert the unit into the dashboard then push the unit into the metal chassis until it is locked.
Attention:
1. Choose the mounting location where the unit will not interface with the normal driving function of
the driver.
2. Before completing the unit installation, connect the wiring temporality and make sure it is all
connected up properly and the unit and system work properly.
3. For safe installing, use the mounting hardware provided by the manufacturer.
Removal:
Insert the levers supplied with the unit into the grooves at both sides of the unit until they click. Pulling
the levers makes it possible to remove the unit from the dashboard.
DISASSEMBLY AND ASSEMBLY INSTRUCTIONS
Assembly instructions
Connect the unit harness with lock and push them together inside,
insert the unit harness into instrument panel,
and push the player into the metal harness until it is locked.
If the assemble angle is above 30, the unit may not work properly.
The installation place should not affect the driver's normal
operations or injure the passengers when the car is braked suddenly.
Disassembly instructions
Take the plastic frame off, and insert the keys into the holes in the face panel, then pull the keys hard to
take player out of the instrument panel.
P-6