Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS.-
Consult your doctor before starting
any exercise program. It is advisable
to undergo a complete physical
examination.
Work at the recommended exercise
level, do not overexert yourself. If
you feel any pain or discomfort, stop
exercising immediately and consult
your doctor.
Maximum user weight 100 kg.
IMPORTANT
Read
the
instructions
before proceeding to assemble the
equipment.
Remove all the parts from the
cardboard packaging and check
them against the parts list to ensure
that there is nothing missing.
Always
use
accordance with the instructions. If
you
discover
component
while
checking the equipment or if you
hear
any strange
exercise then stop. Do not use the
appliance until the problem has been
resolved.
GENERAL INSTRUCTIONS.-
1 This unit has been designed for
home use. The user weight does not
have to exceed 100kg
2 Keep your hands well away from
any of the moving parts.
3 Parents and/or those responsible
for children should always take their
curious nature into account and how
this can often lead to hazardous
situations and behaviour resulting in
accidents. This unit does not have to
carefully
the
appliance
any
defective
assembling
noise
during
English
be used in any case like toy.
4 Your unit can only be used by one
person at a time.
5
Use
footwear. Tie up your shoelace
correctly.
ASSEMBLY
INSTRUCTIONS.-
Take the unit out of the box and
make sure that all of the pieces are
there Fig.1:
(A) Main frame
(B) Foam cover
(C) Lower tightener knob
(D) Foam covers 2 units
(E) Lock pin 2 units
(F) Upper tightener knob
in
Follow the assembly instructions step
by step:
or
1. Remove the upper tightener knob
(F) and the lock pins (E) from the
main frame (A) and unfold it as
shown on the Fig. 2.
2. Insert again the tightener knob (F)
and the pins (E) as shown on the Fig.
3.
3. For fitting the foams covers take
the foam covers (D) and fit them onto
the top rounded tubes for the leg
support. Now insert the part with the
bottom leg support foam covers (B)
in the desired position and fix it
using the knob (8) (Fig. 4).
4. The unit is ready (Fig. 5).
suitable
clothing
and
Publicidad
