Safety Information; Product Specifications - Kobalt SGY-AIR138TZ Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate
or install the product. If you have any questions regarding the product, please call
customer service at 1-888-3KOBALT, 8:00 a.m.-8:00 p.m., EST, Monday-Friday.
Improper operation or maintenance of this product could result in serious injury and
property damage. Read and understand all warnings and operation instructions
before using this equipment. When using air tools, basic safety precautions should
always be followed to reduce the risk of personal injury.
Some dust created by power sanding, sawing, grinding, drilling and other related
activities contains chemicals known to the state of California to cause cancer, birth
defects or other reproductive harm. A listing of chemicals can be obtained from
www.oehha.ca.gov under Proposition 65. Some examples of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks, cement and other masonry products
Arsenic and chromium from chemically-treated lumber
Users of these tools should review the chemical composition of the work surface
and any products in conjunction with the operation of these tools for any such
chemicals prior to engaging in any activity that creates dust and/or microscopic
particles.
Users should obtain the material safety data sheets from all identified chemicals,
either from the manufacturer or their employer, and proceed to study, understand,
and follow all instructions and warnings for exposure to such chemicals. Your risk
from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals, work in a well-ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.

PRODUCT SPECIFICATIONS

COMPONENT
COLLET
FREE SPEED
AVERAGE AIR CONSUMPTION
AIR INLET
AIR HOSE
WORKING PRESSURE
WA R N I N G
WA R N I N G
SPECIFICATIONS
1/4 IN.
20,000 RPM +/- 10%
5. 2 CFM
1/4 IN. NPT
3/8 IN.
90 PSI
3

Publicidad

Tabla de contenido
loading

Tabla de contenido