Gima 27325 Manual De Uso página 5

Product description
GIMA bone measure (cod. 27325) is an orthopedic instrument suitable to measure the bone diameter
of the human body (knee, elbow, shoulder, etc.) with a tolerance of ± 3mm up to a maximum of 150
mm.
The bone measure is equipped with a slider composed of an anticorodal aluminium graduated rule and
two plastic "jaws".
Accident prevention
The product shall be used by qualified personnel only.
Do not use the equipment in case it is damaged. Apply to your retailer.
Avoid precarious repairs. Repairs shall be carried out with original spare parts only, which
shall be installed according to the intended use.
Since the product is made of corrosion-proof materials suitable for the enviromental conditions foreseen
for its normal use, does not require special care, however it is necessary to store it in a closed place
making sure that is protected from dust and dirt to assure its hygenic conditions. Moreover, it is
recommended to store the product in a place which can be reached easily by the personnel in case of
necessity.
Unpacking
Always remember that packing elements (paper, cellophane, stitches, adhesive tape, etc.)
can cut and/or hurt if they are not carefully handled.
They shall be removed with adequate means and shall not be left at the mercy of irresponsible
persons; the same is valid for tools used to remove packages (scissors, knives, etc.).
After opening the packages, first of all it is necessary to check all pieces and parts composing the
product. Check that they are all present and in perfect conditions.
Operating instructions
The bone measure is easy to use. It is sufficient to bring the two jaws near the part of the body to
measure, make the moving jaw slide until it is in contact with the bone and read the value showed by
the graduated scale.
FEATURES
PRESCRIPTIONS
TRANSPORT
OPERATION
5