GE Monogram ZHU30 Manual Del Propietário página 20

Burned-on
residue
Heavy
burned-on
residue
20
WARNING: DAMAGE to your glass surface may
occur if you use scrub pads other than the pad
included with your cooktop.
1 Allow the cooktop to cool.
2 Spread a few drops of CERAMA BRYTE
Cooktop Cleaner on the entire burned residue
area.
3 Using the included CERAMA BRYTE
Pad for Ceramic Cooktops, rub the residue area,
applying pressure as needed.
4 If any residue remains, repeat the steps listed
above as needed.
5 For additional protection, after all residue has
been removed, polish the entire surface with
CERAMA BRYTE ® Ceramic Cooktop Cleaner
and a paper towel.
1 Allow the cooktop to cool.
2 Use a single-edge razor blade scraper at
approximately a 45° angle against the glass
surface and scrape the soil. It will be necessary
to apply pressure to the razor scraper in order
to remove the residue.
3 After scraping with the razor scraper, spread a
few drops of CERAMA BRYTE
Cleaner on the entire burned residue area. Use
the CERAMA BRYTE ® Cleaning Pad to remove
any remaining residue.
4 For additional protection, after all residue has
been removed, polish the entire surface with
CERAMA BRYTE ® Ceramic Cooktop Cleaner and
a paper towel.
Care and Cleaning
® Ceramic
® Cleaning
® Ceramic Cooktop
Induction Cooktop
Use a CERAMA BRYTE ® Cleaning Pad for
Ceramic Cooktops or a Scotch-Brite
Multi-Purpose No Scratch blue scrub
pad.
The CERAMA BRYTE ® Ceramic Cooktop
Scraper and all recommended supplies
are available through our Parts Center.
See instructions under "To Order Parts"
section on next page.
NOTE: Do not use a dull or nicked
blade.
®