Preparing For Use; Suggested Coffee Measurement Chart - Mr Coffee EJ Serie Manual Del Usuario

EJ SERIES IB-FINAL:Layout 2 10/13/2009 12:06 AM Page 10

PREPARING FOR USE

Selecting and Measuring Ground Coffee
For best results, use a level tablespoon for ground coffee measurement.
Make sure you use medium grind coffee for a perfect brew.
A. Suggested Coffee Measurement Chart
To Brew
12 Cups
10 Cups
8 Cups
6 Cups
4 Cups
1 level tablespoon (tbsp) = 5 gr./0.17 oz.
1 cup = 5 fl. oz. of brewed coffee
Use more or less coffee to suit your taste.
10
Ground Coffee
9 tbsp.
7.5 tbsp.
6.5 tbsp.
4.5 tbsp.
3 tbsp.
B. Water Filtration System
Congratulations! You are the owner of a MR. COFFEE
based water filter improves the taste of your coffee by removing up to 97%
of the chlorine from the water you may use to brew your coffee.
First, look for the MR. COFFEE ® Filtration Friendly symbol
basket. If you do not see this symbol, please call 1-800-672-6333.
To use the water filtration system in your
MR. COFFEE ® Coffeemaker, please follow
these steps:
1. Align the red indicator on the frame to the letter
that corresponds with the month that you are
using the disk for the first time. This serves to
remind you to change the disk every month
(approx. 30 brewing cycles).
NOTE: For optimum results, use the water filtration
system with a permanent filter.
2. Rinse the water filter in fresh water before first use.
3. Follow Adding Water and Coffee
instructions.
4. When you are done brewing your coffee, rinse
the water filter with fresh water. Do not put your
water filter in the dishwasher.
To replace the water filter disks, twist the gray disk
cover from your water filtration system. Remove the
used disk. Insert the new disk into the frame and
twist the cover back into place.
®
water filtration system. This carbon-
on the bottom of your filter
Red
Indicator
Frame
Filter Disk
Disk Cover
11