Evaluating Results - Beurer BM 40 Manual De Instrucciones

Measuring can be cancelled at any time by pressing
the START/STOP button
• Systolic pressure, diastolic pressure and pulse read-
ings are displayed.
• appears if the measurement has not been per-
formed properly. Observe the chapter on error mes-
sages/trouble-shooting in these instructions for use
and repeat the measurement.
• The measurement is automatically stored.
• The device switches off automatically after 3 minutes.
Wait for at least 1 minute before taking another
measurement!

6. Evaluating results

Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia
disorders during measurement and if necessary indicates the
measurement with the flashing icon
This may be an indicator for arrhythmia. Arrhythmia is a condi-
tion where the heart rhythm is abnormal as a result of defects
in the bioelectrical system controlling the heart beat. The
symptoms (omitted or premature heart beats, slow or exces-
sively fast heart rate) may be caused, among other things, by
heart disease, age, physical predisposition, excessive use of
stimulants, stress or lack of sleep. Arrhythmia can only be as-
certained through examination by your doctor.
Repeat the measurement if the flashing icon
after the measurement. Please note that you should rest for
.
.
is displayed
5 minutes between measurements and not talk or move dur-
ing the measurement. If the icon
contact your doctor. Any self-diagnosis and treatment based
on the test results may be dangerous. It is vital to follow your
doctor's instructions.
Risk indicator:
The measurements can be classified and evaluated in accord-
ance with the following table.
However, these standard values serve only as a general guide-
line, as the individual blood pressure varies in different people
and different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood pres-
sure as well as the value above which your blood pressure is
classified as dangerous.
The bar graph in the display and the scale on the unit indicate
the range of the blood pressure which has been recorded.
If the values for systolic and diastolic pressure are in two differ-
ent ranges (e.g. systolic in the high-normal range and diastolic
pressure in the normal range) the graphic classification on the
unit indicates the higher range (high-normal in the example
described).
25
appears often, please