SEVERIN KP 1071 Instrucciones De Uso página 15

Timer
The timer function allows for setting the
intended cooking time. Once the desired
function has been selected, press the
operating key , and then use the +
and – selection keys to select the cooking
time. Every press of the + key increases
the cooking time by 5-minute intervals,
while pressing the – key reduces the
cooking time by 1 minute. The maximum
timer setting is 180 minutes. Once the
pre-programmed time has elapsed, a beep
signal is heard and the appliance goes into
stand-by mode.
If no timer setting is selected, cooking can
only be interrupted by pressing the On/
Stand-by switch.
Do not leave the appliance unattended
while in use.
Function indicators
The function indicator shows which of the
'Power', 'Temperature' or 'Timer' functions
has been selected.
Automatic recognition of suitable
cookware
The appliance detects whether any
cookware has been placed on the plate,
and whether it is suitable for this appliance.
If any function is selected with non-suitable
cookware on the plate, a number of beeps
will be heard, and the display will show the
error message ---. After four beeps, the
appliance goes into stand-by mode.
Residual heat indicator
In standby mode, any residual heat in the
plate(s) is indicated on the display. If the
temperature is below approx. 50 °C, the
indicator L shows in the display. For a
residual heat exceeding approx. 50 °C, the
display shows H.
Operation
∙ Connect the unit to mains power.
∙ A beep signal is heard. The appliance is
now in stand-by mode.
∙ The display shows the indicator L for
low residual heat in the plate(s).
∙ Put the food into the pot or pan and put
it on the cooking surface.
∙ Use the On/Stand-by switch
the appliance on. A beep signal is heard
and the function indicators for 'Power'
and 'Temperature' starts fl ashing.
∙ If no input is registered within 30
seconds of switching on, the appliance
returns into stand-by mode.
∙ Use the or
select the required function.
∙ The appliance starts the heating
process.
∙ Use the + and – selection keys to select
the desired power setting or temperature
level.
∙ If so desired, use the timer function
to select the cooking time.
∙ Once cooking is fi nished, switch the
appliance off, let it cool down for 30
seconds and disconnect in from the
mains.
to turn
operating keys to
15