AO Smith AO-US-RO-MB-4000 Manual Del Proprietário página 9

INSTALLATION GUIDE
6
STEP 4 - Install water storage Tank
1
Apply plumber's tape 4 or 5 times
clockwise around the nipple on top of
Tank in the same direction as threads.
2
Hand-tighten Tank connector onto
Tank nipple until secure.
Note: Do not cross thread or over-tighten.
3
Using mount stand, place Tank near the System Manifold. Using the 3/8" white
tubing remaining from the faucet install, connect one end to the Tank and the
other to the port labeled "Tank" on the manifold.
4
Install the 3/8" white tubing to the Tank.
Push tubing through the
nut, collar and sleeve,
into the connector.
NEED HELP? GIVE US A CALL 877.333.7108
Unscrew the compression
nut from Tank connector
to ensure tubing is
connected all the way
through the collar
and sleeve.
Slide nut to the
threads and tighten
with a wrench.
Note: Avoid
over-tightening.