Installation Guide - AO Smith AO-US-RO-MB-4000 Manual Del Proprietário

INSTALLATION GUIDE

2
Prepare site and plan for installation
Prior to installation, read the entire manual to familiarize yourself with the system,
and determine the best location for installation. Ensure you check and comply with
all local plumbing codes.
TIP
Temporarily place System Manifold, Remineralizer,
and Tank into the under sink cabinet or desired
location to ensure adequate space and
proper positioning.
Pre-installed 3/8" white faucet tubing will be used to connect faucet to Remineralizer
as well as connecting Tank to manifold. Measure the tubing from the faucet hole to
the outlet of the System Manifold. Ensure the remaining tubing will be sufficient to
connect manifold to Tank. Do not cut tubing before following instructions below.
Remove system, Remineralizer and Tank from under your sink to begin installation.
NEED HELP? GIVE US A CALL 877.333.7108
WARNING: We recommend using an approved or certified professional.
Proper installation is the responsibility of the installer. Product failure due
to improper installation is not covered under the warranty.
Note: If you have metal drain pipes,
consult a plumber for installation of
drain connection.