Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Sportive 2 14861 Serie Modo De Empleo/Instrucciones De Montaje

Safety Notes
Gloves should be worn during installation to
prevent crushing and cutting injuries.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for
transport damages. After it has been installed, no
transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
The product is exclusively designed for drinking
water!
4
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 70°C
max. 70°C / 4 min
Assembly (see page 32)
English
Symbol description
Do not use silicone containing acetic
acid!
Adjustment (see page 34)
To adjust the hot water limiter. Using a
hot water limiter in combination with
a continuous flow water heater is not
recommended.
Dimensions (see page 31)
Flow diagram (see page 31)


Spare parts (see page 36)
65°C
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Operation (see page 33)
Hansgrohe recommends not to use
as drinking water the first half liter of
water drawn in the morning or after a
prolonged period of non-use.
Cleaning (see page 35)
Test certificate (see page 36)
with EcoSmart
®
without EcoSmart ®