Control Panel Features - LG LSWD305ST Manual De Instrucciones

CONTROL PANEL FEATURES

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your
oven, become familiar with the various features and functions of the oven as described below.
1
2
UPPER LIGHT: Use to turn the upper oven lights on and off.
1
LOWER LIGHT: Use to turn the lower oven lights on and off.
2
UPPER OVEN: Use to activate the upper oven for the main
3
menu selection.
LOWER OVEN: Use to activate the lower oven for the main
4
menu selection.
START: Use to start all oven features. Activate the
5
CONTROL LOCK for 4 seconds holding.
TIMER ON/OFF: Use to set or cancel the timer.
6
7 UPPER CLEAR/OFF: Use to stop cooking or cancel the
setting of the upper oven.
LOWER CLEAR/OFF: Use to stop cooking or cancel the
8
setting of the lower oven.
Touch Screen: Show the time of day, main menu, and oven
9
temperature; whether the oven is the bake, broil or self-
cleaning mode; and the times set for the timer or automatic
oven operations. The display panel will go into a "sleep"
mode if no activity. Touch the display once to activate and
again to make your selection.
10
Main Menu
Cook & Warm
Upper Oven
Bake
Conv.
Bake
Recipe
Bank
16
13
8
3
4
11 12 19
11:35 am
00:00:00
My
Broil Roast
Menu
Crisp Conv. Self
Conv. Roast Clean
Proof
Healthier
Set up
Roast
Warm
17 18 20
14 15
9
Bake: Use to select the normal bake mode.
10
Broil: Use to set the variable broil mode.
11
Roast: Use to select the normal roast mode.
12
Conv. Bake: Use to select the convection bake mode.
13
Crisp Conv.: Use to select the crisp convection mode.
14
Conv. Roast: Use to select the convection roast mode.
15
16 Recipe Bank: Use to recall the recipe category of gourmet
food.
Proof/Warm: Use to proof bread / Use to hold food warm.
17
18 Healthier Roast: Use to select the healthier roast mode.
My Menu: Use to save or recall the favorite 10 cook mode.
19
Set up: Use to change the special settings.
20
Self Clean: Use to select the self-cleaning cycle.
21
NOTE:
• Press CLEAR/OFF pad. Allow the oven to cool for one hour.
Put back into operation.
• If the function error code repeats, disconnect the power to
the oven and call for service.
• If the oven was set for a timed oven operation and a power failure
occurred, the clock and all programmed functions must be reset.
• The time of day will flash and PF will appear in the display when
there has been a power failure.
21
5
7
6 8