Philips GC3800 Serie Manual De Instrucciones página 10

EnGlish
10
Problem Possible cause
The steam boost You have used the steam
function does not boost function too often
work properly within a very short period.
(water leaks out of
the soleplate).
You have used the steam
boost function at a too low
temperature.
Flakes and Scales are formed inside the
impurities come soleplate.
out of the
soleplate during
ironing.
Water leaks from You have overfilled the water
the water filling tank.
door.
All manuals and user guides at all-guides.com
6 Plug in the iron and let the iron heat up to dry the soleplate.
7 Unplug the iron when the temperature indicator light goes out.
8 Move the iron gently over a piece of cloth to remove any water
stains on the soleplate.
storage
1 Unplug the iron and empty the water tank. Let it cool down in a safe
place.
2 Wind the mains cord around the backplate of the iron and store it
on its heel.
troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Centre in your
country (see the worldwide guarantee leaflet for contact details).
Solution
Wait for a few seconds before you use the steam
boost function again.
Set an ironing temperature at which the steam
boost function can be used (●●● to MAX).
Use the Calc-clean funtion (see chaper 'Cleaning
and maintenance', section 'Calc-clean function').
Do not fill the water tank beyond the MAX
indication. Pour excess water out of the water
tank.