Cleaning And Care; Cleaning The Surfaces Of The Hood; Odour Filter; Grease Filter - Franke Frames FS TS 906 I XS Manual Del Usuario

cleaning and care

Before performing any cleaning and maintenance:
Switch off the device.
Z X
For cleaning and care details, refer to the manual
Z X
delivered with the filter.
Fire hazard! Risk of injury!
Deposits in the grease filter may catch fire.
Filters that are not cleaned or changed regularly
may catch fire if open flames or extensive heat
are handled beneath the hood.
Always clean or change all filters at the specified
Z X
intervals.

Cleaning the surfaces of the hood

Do not use any scouring agents or chemical
Z X
detergents, which could corrode or scratch the
durfaces of the device.
Clean the hood using a damp cloth and a neutral
X X
liquid detergent.

Odour filter

New odour filters (activated carbon filter) are
available in specialist stores.
Do not wash or re-use an unwashable odour filter.
Z X
Refer to the manual for cleaning and care details.
Change the odour filter after 4 months of
Z X
operation or earlier after intensive use.
Dispose of the used odour filter in the domestic
Z X
waste.
Changing the odour filter
Open the cover.
X X
Remove the grease
X X
filter.
FS TS 906 I XS
Change the odour filter.
X X
Close the cover.
X X

Grease filter

The grease filter can be cleaned in the dishwasher.
For cleaning and care details, refer to the manual
Z X
delivered with the filter.
Clean the grease filter after 2 months of operation
Z X
or earlier after intensive use.
Cleaning the grease filter
Open the cover.
X X
Remove the grease
X X
filter.
Clean the grease filter.
X X
Put the grease filter back in place.
X X
Close the cover.
X X

Lighting

Make sure that the LED in the spotlights are
Z X
changed only by the customer service.
– 9 –
EN