Bosch GWS 180-LI Professional Manual Original página 20

20 | English
(11) Clamping nut
(12) Protective guard for cutting
A)
(13) Cutting disc
(14) Handle (insulated gripping surface)
(15) Grinding spindle
A)
(16) Hand guard
A)
(17) Rubber sanding pad
A)
(18) Abrasive disc
Technical Data
Angle grinder
Article number
Rated voltage
A)
Rated speedl
No-load speed
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding spindle
Restart protection
Run-out brake
Soft start
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary handle
– with standard auxiliary handle
Recommended ambient temperature during charging
Permitted ambient temperature during operation
during storage
Recommended rechargeable batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3.
Typically, the A-weighted sound pressure level of the power
tool is 80 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Surface grinding (roughing):
2 2
a = 7.0 m/s , K = 1.5 m/s ,
h
Disc sanding:
2 2
a = 3.5 m/s , K = 1.5 m/s .
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
1 609 92A 5GT | (27.03.2020)
(19) Round nut
A)
(20) Cup brush
(21) Diamond core bit
(22) Extraction guard for cutting with cutting guides
(23) Diamond cutting disc
A) Accessories shown or described are not included with the
V=
-1
min
-1
min
mm
mm
A)
kg
kg
°C
B)
and °C
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
A)
A)
A)
A)
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 180-LI GWS 180-LI
3 601 JH9 0.. 3 601 JH9 0..
18
11,000 11,000
–
100 115
M 10 M 14
22
●
–
●
2.2–2.9 2.3–3.1
2.0–2.8 2.2–2.9
0 to +35 0 to +35
–20 to +50 –20 to +50
GBA 18V... GBA 18V...
ProCORE18V... ProCORE18V...
GAL 18... GAL 18...
GAX 18... GAX 18...
GAL 36... GAL 36...
A)
GWS 180-LI
3 601 JH9 0..
18 18
11,000
– –
125
M 14
22 22
● ●
– –
● ●
2.3–3.1
2.2–2.9
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools