ShelterLogic SUPER MAX CANOPY Instrucciones De Montaje página 4

1. Pre-Assembly: lAY OUT the ROOF FRAME
Assembly is easiest if you layout all parts as shown in the area you intend to erect the shelter
Keep all non pipe parts on a tarp or box top.
2. ASSEMBlE ROOF FRAME
Start with the center rafters, then assemble each side.
NOTE: Swedged tubes insert into plain ends at the crimp marks.
Page 4
Swedged Tube Connections
800241 800240
Crimp Marks
05-25773-0D