OPERatiOn inStRUCtiOnS COnt.
• After total time has elapsed, the
system will sound beeps with END in
the display. The beeps will continue
to sound automatically every two
minutes until the door is opened or
any button is touched.
• After setting SPEED DEFROST, oven
can be programmed to automatically
switch to single or multiple-stage
cooking.
• For speed defrost and single stage
cooking, follow steps above. Before
touching START/STOP, touch TIME
COOK 2, enter time and power level
and then touch START/STOP.
• For speed defrost and multiple stage
cooking, follow steps above. Before
touching START/STOP, touch TIME
COOK 2, enter two-stage cooking
programs and then touch START/
STOP to start.
aUtO COOk
1. Touch AUTO COOK.
2. Select food code using numbers 1-3
on the number pad.
3. Enter food weight.
4. Touch START/STOP.
aUtO COOk fOOD CODES
CODE
tyPE
1
Beef
2
Lamb
3
Pork
nOtE: Meat must be defrosted and at
refrigerated temperature.
• Weight must be in pounds and ounces.
• Ounce weights less than 10 must be
• During cooking, the system will
• After total time has elapsed, the
aUtO DEfROSt
1. Touch AUTO DEFROST pad.
2. Enter food weight with the number
3. Touch START/STOP pad to start
nOtE: Weight must be in pounds and
ounces. Ounce weights less than 10
must be preceded by a 0. If label gives
weight in pounds only, change the
fraction of a pound to ounces using the
chart on the following page.
• During defrosting, you need to turn
MaX WEigHt
5 lb. 16 oz.
5 lb. 16 oz.
5 lb. 4 oz.
• After total time elapsed, the system
Page 13 • Set UP & USe
preceded by a 0. If label gives weight
in pounds only, change the fraction of
a pound to ounces using the chart on
the next page.
Example:
1 lb. 8 oz. = 108
2 lb. 12 oz. = 212
pause automatically and beep to
remind users to turn meat over. After
turning, touch START/STOP to resume
cooking.
system will sound several beeps with
END in the display. The beeps will
continue to sound automatically every
two minutes until the door is opened
or any button is touched.
pad.
cooking.
food over for uniform defrosting. After
turning, touch START/STOP pad to
resume defrosting.
will sound several beeps with END in
the display. The beeps will continue
to sound automatically every two
minutes until the door is opened or
any button is touched.