OPERATION INSTRUCTIONS CONT.
TIME DEFROST
1. Touch the DEFROST AUTO/TIME pad
2 times, the display will show dEF2.
2. Enter desired defrosting time with
the number pad.
3. Touch START/+30 Sec to begin
defrosting.
NOTE: The default power setting for
defrosting is 30% (PL3).
SETTING A COOKING PROGRAM
Multiple-stage cooking
Some foods or recipes require
different stages of cooking at different
temperatures.
Example: To defrost 40 ounces (oz.) of
beef and then cook at 100% power for
10 minutes
1. SET STAGE 1:
Press the DEFROST AUTO/TIME
pad and enter '40' for the weight in
ounces. Do not touch START/+30
Sec.
2. SET STAGE 2:
Touch POWER pad then enter the
cooking time 10:00
3. Touch START/+30 Sec to start
cooking.
NOTE:
- Convenience Cooking pads (i.e.
Popcorn) cannot be used for
multi-stage cooking.
- DEFROST AUTO/TIME can be used for
multi-stage cooking.
SETTING CHILD LOCK
The safety lock prevents unsupervised
operation by children. Set the function
in standby mode.
To set: Press and hold STOP/CLEAR for
3 seconds. Lock icon is indicated on the
display and there will be a long beep.
To cancel: Press and hold STOP/CLEAR
for 3 seconds, there will be a long beep.
Lock icon disappears from the display.
MEMORY
You can store up to 3 programs into
memory for future use:
Touch the MEMORY pad, the number
1 will be displayed*. Set a 1 or 2 step
cooking procedure as described above.
Press MEMORY to save the setting.
To use a stored program, Touch the
MEMORY pad, the number 1 will be
displayed. Touch the START/+30 Sec
pad.
* Touch MEMORY repeatedly to access
memory locations 2 and 3
PAGE 13 • SET UP & USE