Fellowes Metal 100r Instrucciones Del Uso página 12

ENGLISH
BINDING A DOCUMENT
1
Punch front and back covers
first.
5
Hold the document in both hands,
with the metal coil on the right
side. Touch the metal coil against
the inserting roller to bind the
document.
CORRECTING A BOUND DOCUMENT
Additional sheets may be included or removed at any time by first removing the old metal coil. Correct document as necessary, then rebind as
described.
REMOVAL OF WASTE CLIPPINGS
The waste tray is located in the back of the machine. For best results empty the tray regularly.
13
2
MÁX 20
(80gsm)
Punch sheets in small batches
so as not to overload the
machine or the user.
6
Use the binding pliers to cut and
fold the end of the metal coil. Clip
off the excess coil.
3
Switch the inserting roller on.
7
Turn the document around.
4
Collate the document. Load the
coil on to the first 3 holes.
8
Clip off the excess coil.