THOMSON THVC20312SB Manual De Instrucciones página 31

Tips: Choose location close to power outlet. Locate point high
enough on wall to allow wand and power brush to hand freely. Place
wall mount against wall and use pencil to mark drill holes. Drill holes
(with 1/4"bit) and insert drywall anchors. Insert screws through holes
on mount and tighten until firmly attached.
Drywall anchors
- Slide wand into main body until it clicks
- Push wand into power brush until it clicks
- Accessories can be connected with wand When cleaning high
position
How to connect accessories?
EN-9
Screws