Troubleshooting - THOMSON THVC20312SB Manual De Instrucciones

TROUBLESHOOTING

In case of mini-function, please refer to the following table
Problem Possible causes
3 lamps
for power The rolling bar is wrapped
indicator
Temperature is too high or low
flicker
power
brush Brush is trapped by hair or
does not larger debris
work
Battery needs to be replaced
Running
Ambient temperature is too
time
high or too low
shortened
Battery is no fully changed
The dust cup is full
The
The filter is blocked
vacuum
Suction inlet of brush or other
has no
accessory is blocked
suction
Parts of the appliance is not
power
fully dried after cleaning
Ambient temperature when
Not
charging is too low or too
charging
high
Solution
Cleaning the rolling bar
Mover the vacuum to
suitable temperature
Ensure that no hair or
other thread is trapped
around the brush and
check brush area for
larger debris
Contact the shop or
after sales service to
replace the battery fat
the user's own cost
Your vacuum should
only be operated in
suitable ambient
temperature
The battery needs
charging
Clean the dust cup
after use to prevent
build ups
Remove any dust or
debris from the filter
Check for blockages at
brush and other
attachment points
Ensure that all
components are
properly dried after
washing
Charge the machine
under the right
temperature
environment (5℃-40℃)
EN-16