Dometic PERFECTROOF PR4500 Instrucciones De Uso página 14

Ocultar thumbs Ver también para PERFECTROOF PR4500:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71
Operating the awning
6.3
Retracting the awning
A
NOTICE! Beware of damage
• Only retract the awning, when the fabric is free of debris (branches,
leaves or similar). Otherwise the awning can be damaged when it is
retracted.
• Keep the awning free of debris to avoid abrasion, stains and mildew.
• When retracting the awning, make sure that any branches or other
objects are not trapped in it.
➤ Remove any debris (branches, leaves or similar) lying on the fabric.
➤ Briefly press the
✓ The awning retracts.
➤ Double-check that the awning is fully retracted before starting your journey.
The front cover should rest closely alongside the housing.
A
NOTICE! Beware of damage
If the awning is retracted when wet, extend it again at the next
opportunity and let the fabric dry out. If the wet fabric stays rolled up for
a long time it becomes mildewed and can stain.
6.4
Testing the wind sensor
!
WARNING!
• The wind sensor is a safety-related part. Malfunctioning of the wind
sensor can lead to fatality or serious injury, as well as serious damage
to your vehicle.
• Test the wind sensor before each journey and at regular intervals.
• Do not change any settings on the wind sensor. A change in the
default settings can cause the wind sensor to malfunction and lead to
fatality and serious injury, as well as serious damage to your vehicle.
I
NOTE
Any change made to the default setting will invalidate the warranty.
To test the wind sensor, proceed as follows:
➤ Briefly press the
✓ The awning extends all the way.
14
button.
button.
PR4500
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido