Dometic PERFECTROOF PR4500 Instrucciones De Uso página 20

Adjusting the awning
7.3 Resetting the motor and remote control
The motor and remote control are synchronised by default. The motor and remote
control must be reset in the following cases:
• If the awning no longer responds to the remote control commands
• If the remote control or the receiver have been changed.
Step 1: Check the battery in the remote control
➤ Check that the battery in the remote control is not run down:
To do this, press a button on the remote control.
✓ The LED on the remote control lights up briefly.
If the LED does not light up, the battery is flat. Replace the battery (see chapter
"Changing the battery in the remote control" on page 15).
Step 2: Check the function of the motor and remote control
➤ Check that the motor and remote control work by pressing the
✓ The awning extends all the way.
If the awning does not respond, does not extend all the way, extends too far
(fabric is not taut) or stops when the button is released, continue with step 3.
20
PR4500
button briefly.
EN