Publicidad
Idiomas disponibles
Idiomas disponibles
The total operating time set before the automatic switching off (or switching ON) is given by
the light indicators (for example if all the timer light indicators are on during the operating
time set before the automatic switching off, the total operating time is given by:
1H (1 hours) +2H (2 hours)+ 4H (4 hours)+ 8H (8 hours) = 15 hours.
The timer light indicators are turned off/ on according to the operating time remained.
To disable the timer function press the button until all the operating light indicators are off,
or turn off the fan manually by pressing the Off button.
OSC Button (E)
Press this button when unit is on to activate the automatic oscillation from left to right. To
deactivate the automatic oscillation press again this button.
VERTICAL SLOPE:
You can vertically point the front of the fan choosing the desired
angle. It is sufficient to move the front of the fan up or down
according to the desired slope.
ADJUSTMENT HEIGHT.
Loosen the height adjustment knob (F), then set the desired height for the fan. Tighten firmly
the knob after adjusting the rod.
N.B: this operation must always be carried out while the fan is turned off.
(EN) MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan and unplug it.
Ensure that the fan is switched off from the supply mains before removing the guard.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
Reinstall the guard after cleaning and before connecting the plug tot he mains.
When you do not use it, after cleaning it, store the fan in a dry place.
13 / 54
Publicidad
