Graf ECOBLOC INSPECT 420 Instrucciones Para El Montaje página 20

GRAF EcoBloc Inspect 420
Order-Nr. 402000
The points described in these
instructions must be observed
under all circumstances.
warranty rights are invalidated
in the event of non-observance.
Separate installation
tions are enclosed in the trans-
portation packaging for all addi-
tional articles purchased from
GRAF.
The Graf EcoBloc Inspect must
be checked for any damage pri-
or to installation under all cir-
cumstances.
Missing instructions
downloaded on www.graf.info or
can be requested from GRAF.
mail@graf.info
www.graf.info
Instructions for installation
GRAF EcoBloc Inspect 420
Contents
1. GENERAL INFORMATION
1.1 General
All
1.2 Safety
1.3 Information about operating the system
instruc- 2. GENERAL PRODUCT INFORMATION
3. TECHNICAL DATA
3.1 Technical data for the GRAF EcoBloc Inspect 420
4. TRANSPORT & LAGERUNG
4.1 Transport and storage
5. LOCATION OPTIONS
5.1 Location
5.2 Pre-treatment
5.3 Installation dimensions
6. LOAD CLASSES
6.1 Installation for pedestrian loading
6.2 Green spaces above the EcoBloc Inspect system
can be
6.3 Installation for vehicle loading
7. INSTALLATION
7.1 Construction & installation of an infiltration tank
7.2 Covering with geo textile
7.3 Positioning of ground plates
7.4 Fitting inlet
7.5 Connecting inspection channel
7.6 Covering the EcoBloc Inspect system
8. CONSTRUCTION & INSTALLATION OF ATTENUATION
TANK
8.1 Installationof attentuation tank
8.2 Laying geo textile film and geo textile
8.3 Construction of attenuation tank
9. INSTALLATION UNDER TRAFFIC AREAS UP TO
HGV60
10. USE OF CONSTRUCTION MACHINERY IN THE
INSTALLATION PHASE
11. OTHER APPLICATIONS
18 / 69
19
19
19
19
20
21
21
22
22
23
23
23
24
25
25
25
25
26
26
26
26
28
28
29
30
30
30
30
31
32
33