Transport & Lagerung; Transport And Storage - Graf ECOBLOC INSPECT 420 Instrucciones Para El Montaje

4. Transport & Lagerung
4.1

Transport and storage

The GRAF EcoBloc Inspect 420 system elements are combined into packaging units of four and provided
with transport feet to simplify transport. This produces a stack height of around 2.70 m and a base area of
0.80 m x 0.80 m.
The Graf EcoBloc Inspect 420 system elements can be transported to the installation location with a fork
lift lorry or similar equipment. At the installation location, the EcoBloc Inspect and baseplates can be
moved manually or with light-duty equipment.
A level and stable surface should be used for intermediate storage. Storage outdoors should not be for
any longer than one year. The impact sensitivity of the elements also increases as temperature falls. In
particular, impact during frosty weather could damage the elements.
Before installation, the EcoBloc Inspect and ground plates should be checked for damage. Dam-
aged or defective blocks must not be installed!
4. Transport & Lagerung
22 / 69