In order to reduce the number of end plates, the
first and the last transverse rows have to be turned
90° in the longitudinal direction.
End plates
Inspection channel
The Eco connecting elements are needed to fix in
each layer of EcoBloc Inspect modules.
The EcoBloc Inspect 420 has integrated centering
aids to fix and align multi-layered installations.
Then the end plates are fitted. These can simply
be snapped into the opening on the EcoBloc In-
spect 420. The end plates must be inserted, so
that GRAF Logo is in accordance with the writing
direction. DN 100, DN 150 or DN 200 connections
can be produced for inlets on the Eco end plate. A
Dremel drill, jig saw or similar tool is used to re-
move the connections.
7. Installation
28 / 69