Medisana MS 1000 Manual De Instrucciones página 14

3.2 Power on the device
• Plug the mains cable completely into the mains connection on the
device.
see postion
• Plug the power plug into a wall outlet.
• Set the on/off switch to the „l" position.
If the electrical connection is interrupted during the mas-
sage, massage heads will return immediately to the
parking position after being reconnected to the power
supply.
If the massage heads are not extended:
Press the On/Off button on the remote control to return
the massage heads to their original position.
3.3 Functions and remote control
After the unit is powered and the On/Off switch is set to position „I", the unit
is in sleep mode.
Only a few basic functions are available in this mode.
The h buttons change the angle of the back section and the leg section of
the device. Button 9 switches the unit on completely.
Overview of all remote control buttons
9 On/Off button: The button and the LC display light up.
Now select one of the massage function buttons to start the massage.
Press button 9 again to end all massage functions. The moving parts of
the massage chair will then return to their original position.
8
0 Pause: Press this button to pause during a previously selected massage
mode. The button flashes and the time control for the massage programs is
also paused. Press the button again to continue the massage.
q Heating function
1. button press = activate heating function for lumbar
2. button press = switch off the heating function
w Switch foot massage roller on and off
e Automatic programs: Select one of the 6 available automatic programs.
The device first performs a scan to determine the shoulder height. If you
are not satisfied with the determined position, you can readjust it within 10
seconds using the Up g /Down f buttons. The selected program will then
start.
Relax
Fitness
Health = a massage like in a spa
Vigorous = powerful massage
Neck & Shoulder
Waist & Buttock
h Back and leg section adjustment: the h buttons change the angle of
the back section and leg section of the device. Press and hold the res-
pective button once to start the movement, release the button to stop the
movement. The key „ZGR" selects the „Zero-G-Mode". The massage chair
moves you into a horizontal position that feels like weightlessness.
r spot massage/partial back massage:
Spot massage at the current point on the back.
Press the button again to switch to partial back massage -
The massage heads move up and down 8 cm at the selected point.
DE
3 Operating
14