Husqvarna YT48DXLS Manual De Operario página 21

Ocultar thumbs Ver también para YT48DXLS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SERVICE AND ADJUSTMENTS
A
ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in link assembly over pin on
rear mower bracket (D) and secure with washer and
retainer spring.
Repeat on opposite side of tractor.
D
ATTACH FRONT LINK (E) - Work from left side of trac-
tor. Insert threaded rod end of link assembly through
front hole in tractor suspension bracket (F).
Install bushing (O) and loosely install nut (P) and jam
nut (Q).
Insert flared ends of link (E) into slots in front mower
bracket (H).
C
D
B
Fig. 25
C
Fig. 26
A
C
D
Fig. 29
Check Front-To-Back Adjustment in "TO LEVEL
MOWER" in this section.
H
Install belt onto electric clutch pulley (M).
M
IMPORTANT: CHECK BELT FOR PROPER ROUTING IN
ALL MOWER PULLEY GROOVES.
Raise attachment lift lever to highest position.
If necessary, adjust gauge wheels before op er at ing
mower as shown in the Operation section of this manual.
See Mower Drive Belt Installation in "TO REPLACE MOWER
BLADE DRIVE BELT" in this section of the manual.
M
21
F
O
P
E
Fig. 27
Fig. 28
F
P
O
E
H
B
Q
Q

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido