Presetting Stations - Aiwa AV-D67 Manual De Instrucciones

PRESETTING STATIONS

The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 Turn the FUNCTION to select the TUNER function,
and press the DIGITAL/ANALOG/BAND button
repeatedly to select the desired band. Then press
the N or M button to select a station.
2 Press the ENTER button to store the station.
A preset number assigned to the station, beginning from 1 in
consecutive order for each band, appears in the display for
two seconds.
3 Repeat steps 1 and 2.
No more stations will be stored and "FULL" appears if a total
of 32 stations have already been stored for all the bands.
NOTE
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
PRESET NUMBER TUNING
1 Turn the FUNCTION to select the TUNER function,
and press the DIGITAL/ANALOG/BAND button
repeatedly to select a band.
2 Turn the MULTI JOG to select a preset number.
When operating with the remote control
Press the TUNER/BAND button while pressing the SHIFT button
to select a band, then press the numbered buttons to select a
preset number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7 press 0 and 7.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the ENTER button, and press it again within four seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
n En
14
ENGLISH