Product Description And Specifications; Technical Data; Noise/Vibration Information - Bosch GSA 18 V-LI C Professional Manual Original

OBJ_BUCH-2489-003.book Page 14 Monday, October 24, 2016 10:54 AM
14 | English
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for sawing wood, plastic, metal and
building materials while resting firmly on the workpiece. It is
suitable for straight and curved cuts. The saw blade recom-
mendations must be observed.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Saw blade*
2 Base plate
3 Locking sleeve for saw blade
4 Stroke rod
5 Battery pack
6 Lock-off button for On/Off switch
7 On/Off switch
8 "PowerLight"
9 Handle (insulated gripping surface)
10 Battery unlocking button
11 Battery charge-control indicator
12 Saw blade holder
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Sabre saw
Article number
Rated voltage
Stroke rate at no load n min
0
Tool holder
Stroke
Cutting depth, max.
– in wood
– in non-alloy steel
– Pipe diameter
Weight according to EPTA-
Procedure 01:2014
* Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
1 609 92A 33V | (24.10.16)
Sabre saw
Permitted ambient temperature
– during charging
– during operation* and during
storage
Recommended batteries
Recommended chargers
* Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-11.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-11:
Cutting board: a
Cutting wooden beam: a
The values given for sawing particle board apply for a workpiece thick-
ness of 20 mm.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
GSA 18 V-LI C
period.
Identify additional safety measures to protect the operator
3 601 FA5 0..
from the effects of vibration such as: maintain the tool and the
V= 18
accessories, keep the hands warm, organisation of work pat-
-1
0–3050
terns.
SDS
Declaration of Conformity
mm 21
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
mm 200
vant provisions of the directives 2009/125/EC (Regulation
mm 16
1194/2012), 2011/65/EU, until 19 April 2016:
mm 100
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC including their amendments and complies with
kg 2.5 – 3.0
the following standards: EN 60745-1, EN 60745-2-11,
EN 50581.
GSA 18 V-LI C
°C 0...+45
°C –20...+50
GBA 18 V...
GBA 18 V...W
AL 18..
GAL 3680
GAL 18...W
(triax vector sum) and uncertainty K
h
2 2
=9 m/s , K=1,5 m/s ,
h
2 2
=8 m/s , K=1,5 m/s .
h
Bosch Power Tools