Starting A Cycle Wash; Changing The Program Mid-Cycle - Infiniton DIW61STB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Description
Program
Of Cycle
Wash(45℃)
Rinse(50℃)
Rapid
Rinse(55℃)
Prewash
Soak
NOTE:
EN 50242:
This program is the test cycle. The information for comparability test in
accordance with EN 50242.

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page "Product fiche".
Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
Running
Detergent
Time(min)
Pre/Main
25g
15
Energy
(Kwh)
30
0.75
15
0.02
Water
Rinse
(L)
Aid
11
4

Publicidad

Tabla de contenido
loading

Tabla de contenido