Orbegozo PHE 90 Manual De Instrucciones página 19

PHE 90
Table of injector
The hose and regulator assembly must conform to local standard codes
•
Regulator outlet pressure should meet the corresponding appliance category showed in the
•
specifications
The appliance requires approved hose in 0.5 m
•
ASSEMBLY PARTS
Tools needed:
Philips screwdriver w/ medium blade
Spray bottle of soap solution for leakage test
A. Reflector
B. Upper protective grille
C. Protective mesh
D. Protective grille for tube
E. Gas hose
F. Cylinder housing
G. Base
H. Wheels
APPLIANCE CATERGORY:
TYPE OF GAS:
GAS PRESSURE:
OUTLER PRESSURE OF
REGULATOR:
APPLIANCE CATEGORY:
TYPES OF GAS:
GAS PRESSURE:
TOTAL HEAT
INPUT (Hs): (Qn)
INJECTOR SIZE:
I
3+(28-30/37)
Butane Propane
28-
37 mbar
30mbar
30mbar 37 mbar
I
3+(28-30/37)
Butane Propane
28-30mbar 37 mbar
11 Kw (800g/h)
1.75 mm for main burner
0.22 mm for pilot burner
|
19