Error Codes; Copyright And Trademark Notice - Lovibond MD 110 Manual De Instrucciones

Operating messages – Error codes
GB
Store Date
Cal
RESULT
Time Cal
E27 / E28 / E29
E 10 / E 11
E 20 / E 21
E23 / E24 / E25
E 22
E 70
E 71
E 72
E 73
E 74
E 75
E 76
E 77
E 78
E 79
E 80
E 81
E 82
E 83
E 84
E 85
E 86
E 87
E 88
E 89

Copyright and Trademark Notice

The Bluetooth word mark is a registered trademark owned by Bluetooth SIG, Inc. and any
®
use by The Tintometer
iOS is a registered trademark of Cisco, Inc. and licensed to Apple, Inc.
®
iTunes Store is a trademark of Apple, Inc., registered in the U.S. and other countries.
®
Android and Google Play
™
Excel is a trademark of Microsoft Corp., registered in the U.S. and other countries.
®
MD110_1 12/2016
A user calibrated method is indicated by an arrow while the test result
is displayed (see "Factory calibration reset").

Error codes

Light absorption too great. Reasons: e.g. dirty optics.
Calibration factor "out of range"
Too much light reaching the detector.
Too much light reaching the detector.
Battery capacity was too low during measurement. Change battery.
AL: Factory calibration incorrect / erased
AL: User calibration incorrect / erased
FE: Factory calibration incorrect / erased
FE: User calibration incorrect / erased
Cu: Factory calibration incorrect / erased
Cu: User calibration incorrect / erased
Si Hr: Factory calibration incorrect / erased
Si Hr: User calibration incorrect / erased
-
CL : Factory calibration incorrect / erased
-
CL : User calibration incorrect / erased
PO4: Factory calibration incorrect / erased
PO4: User calibration incorrect / erased
O2: Factory calibration incorrect / erased
O2: User calibration incorrect / erased
DEHA: Factory calibration incorrect / erased
DEHA: User calibration incorrect / erased
Hydr: Factory calibration incorrect / erased
Hydr: User calibration incorrect / erased
POLY: Factory calibration incorrect / erased
POLY: User calibration incorrect / erased
Group is under license.
®
are trademark of Google, Inc.
™
71