Medline MDS5001 Manual Del Usuario página 13

TROUBLESHOOTING
Problem Recommended Method
Make sure that the batteries are installed in the proper direction. (Polarity
No display
matches to the indication in the battery case.)
Check that the cuff is positioned properly, then repeat the
No measurement
occurs
measurement procedure.
1. Check if your arm is positioned properly.
Blood pressure
readings are too
2. Position your arm on a table so the cuff is at the same level as your heart.
high or too low
3. Remain seated during the entire measurement period.
4. Refrain from hand and body movements during measurement.
Your blood pressure can fluctuate considerably throughout the day, all of the
Blood pressure
readings are
following factors can influence your blood pressure: emotional state, daily
variable
activities/excercise, smoking, drinking alcoholic beverages, eating, taking
certain medications
13