Panasonic CQ-C300U Manual De Instrucciones página 26

Reproductor de cd, wma y mp3/receptor
Ocultar thumbs Ver también para CQ-C300U:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
No playback or disc
ejected
Sound skipping or
noise
Sound skipping due to
vibration
Disc unejectable
No playback or disc
ejected
The CD-R/RWs that
are playable on
other devices are not
playable on this unit.
Sound skipping or
noise
26
CQ-C300U
Problem
The disc is inserted upside down.
Insert a disc correctly.
There is a flaw or foreign material on the disc.
Remove the foreign material, or use a flawless disc.
There is a flaw or foreign material on the disc.
Remove the foreign material, or use a flawless disc.
The unit is not sufficiently secured.
Secure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
Make the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
Consult your dealer.
The microcontroller in the unit operates abnormally due to noise or other factors.
Unplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
The disc has unplayable formatted data.
Refer to the description about MP3/WMA for playable sound data except
CD-DA (i.e. music CD).
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are playable
on other devices such as a PC.
Make CD-R/RWs in different combination of media, recording software and
recorder after referring to the description about MP3/WMA.
There is a flaw or foreign material on the disc.
Remove the foreign material, or use a flawless disc. For MP3/WMA, refer
to the description about MP3/WMA.
Playing VBR (Variable Bit Rate) files may cause sound skipping.
Play Non-VBR files.
Possible cause
Possible solution

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido