Bradley SN2008/IR Manual De Instalación página 7

Installation
Optional Towel Dispensers and 4-Inch Shroud
A
Attach Slip Ring to ceiling. Use (5)
1/4" screws (provided by installer), in a
6" diameter circle.
B
Attach Dispensers, using them as a
guide for positioning mounting brackets.
C
Using supplied screws, secure base
of shroud to the sprayhead cover.
D
Connect base of vent pipe to
drain as described in Step 3.
Optional Dispenser Mounting Brackets for 1-1/2" Pipe
A Mount Brackets for a 1-1/2" pipe in a similar
manner to above. Secure brackets in position
using tie-bar supports as shown.
Bradley • 215-1069 Rev. H; ECN 12-00-011
Mounting Bracket
Soap Filler Cap
Vent Pipe (shown for
illustrative purposes)
Shroud
Pipe Cap
Mounting Bracket
Tie Bar
Spacer Sleeve
6/29/12
SN2008/IR
7