Roadstar TT-260SPK Manual De Instrucciones página 4

1 English
LOCATION OF CONTROLS
1. POWER CORD
2. POWER BUTTON
3. RCA LINE OUT
4. AUX-IN PLUG
5. TONE ARM
6. TONEARM CLAMP
7. LIFT LEVER
8. SPEED SELECTOR (33/45/78rpm)
9. EP ADAPTER
10. VOLUME KNOB
11. SPEAKERS
PRECAUTION
•
INSTRUCTIONS - All the safety and operating instructions should be read before
the radio is operated. The manual should be retained for future reference.
• HEED WARNINGS - All warnings on the appliance and in the operating instruc-
tions should be adhered to.
•
WATER AND MOISTURE - The appliance should not be used near liquids or in
rooms with a high level of humidity.
•
VENTILATION - The appliance should be situated so that its location or position
does not interfere with its proper ventilation.
• HEAT - The appliance should be situated away from heat sources such as radia-
tors, stoves or other appliances that produce heat.
•
POWER SOURCE - The radio should be connected to power supply only of the
type described in the operating instructions or as marked on the appliance.
• POWER CORD PROTECTION - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon/against
them.
• OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
•
DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
- The power supply cord or plug has been damaged;
- Objects have fallen into or liquids has been spilled into the radio;
- The appliance has been exposed to rain;
- The appliance has been dropped or the enclosure damaged;
- The appliance does not appear to operate normally.
• SERVICING - The user should not attempt to service the appliance beyond that
descrive in the user operating instructions. All the servicing should be referred to
qualified service personnel
Note: If your unit has no reaction to operation of any control may due to the electro-
static discharge. Switch off and disconnect the AC cord then turn the power back on
after a few seconds.