Power Sources; Turntable Operation; Aux-In Operation - Roadstar TT-260SPK Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16

POWER SOURCES

AC POWER: You can power your portable stereo system by plugging the AC power
cord into the AC plug (1) at the back of the unit and into a wall AC power outlet.
Check that the rated voltage of your appliance matches your local voltage.
Make sure that the AC power cord is fully inserted into the appliance.

TURNTABLE OPERATION

1. Press the [POWER] button (2) to turn ON the unit ;
2. Place a record on the turntable. Place the EP adapter over the central spindle
when playing 45 rpm records;
3. Set the [SPEED SELECTOR] (8) to 33, 45 or 78 rpm according to the record;
4. Release the [TONEARM CLAMP] (6), and remove the stylus protector;
5. Lift up the [TONEARM] (5) with the [LIFT LEVER] (7);
6. Move the [TONEARM] (5) to the beginning of the record;
7. Lift down the [TONEARM] (5) with the [LIFT LEVER] (7);
8. Adjust the volume with the [VOLUME KNOB] (10) to the desired level;
9. When the record is finished the tonearm will automatically stop. Lift the tonearm
from the record and return it to the rest.
10. To stop manually, lift up the tonearm from the record and return it to the rest sup-
port;
11. Press the [POWER] button (2) to turn OFF the unit.
Note: Do not stop or turn the plate manually.
When the unit is moved or transported:
Lock the [TONEARM] (5) with the [TONEARM CLAMP] (6).
Place the protective cap on the stylus (even when not in use).

AUX-IN OPERATION

1. Press the [POWER] button (2) to turn ON the unit ;
2.
Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the
3.
Music control (play, pause, etc) must be done from your external device;
4. Adjust the volume with the [VOLUME KNOB] (10) to the desired level;
5. Press the [POWER] button (2) to turn OFF the unit.
Note: Disconnect the jack plug from the radio when you no longer want to use this
source, as it has priority over other functions.
RCA LINE-OUT
You can connect the unit to an external audio system (speakers or amplifier) through
the [LINE OUT SOCKET] (3) using an RCA audio cable (not included).
[AUX-IN SOCKET]
English
(4);
2

Publicidad

Tabla de contenido
loading

Tabla de contenido