Surfox-H Electrolyte Solution; Mounting A Cleaning Pad - Walter SURFOX 104 Manual De Usuario

10
Accessories
C) SURFOX electrolyte solution
SURFOX electrolyte solutions are specially formulated
phosphoric acid cleaning solutions designed to be used
only in WALTER SURFOX electro cleaning systems.
SURFOX-H
Electrolyte Cleaning Solution
Cleans up to 3-5 feet per minute.
1.5 L/50.7 oz.
STD Pack: 1 STD Carton: 4
20 L/5.2 gal.
STD Pack: 1 STD Carton: 1
208 L/55 gal.
STD Pack: 1 STD Carton: 1
SURFOX-T
Heavy-Duty Electrolyte Cleaning Solution
Cleans up to 3-5 feet per minute.
1.5 L/50.7 oz.
STD Pack: 1 STD Carton: 4
20 L/5.2 gal.
STD Pack: 1 STD Carton: 1
208 L/55 gal.
STD Pack: 1 STD Carton: 1
WARNING! Do not reuse SURFOX-H solution after it has
gone through the SURFOX unit for cleaning. Used solution
loses its cleaning effectiveness, while the "waste" liquid can
become contaminated with dirt and particles. If these un-
wanted particles are put back into the unit, they can cause
mechanical failure to the pump, check valve and other
internal components.
14
D) Mounting a cleaning pad
No: 54-A 015
1. Squeeze and insert clamp ring.
No: 54-A 017
No: 54-A 018
No: 54-A 005
2. Insert cleaning pad.
No: 54-A 007
No: 54-A 008
3. Firmly press-in tungsten tip.
4. Remove tip with installed pad and
Note: When mounting classic pads, ensure the Ω sign
is facing up on step 2.
clamp ring.