Start-Up Procedure; What Is Included In The Box; Filling The Reservoir; Plugging In The Power Cord - Walter SURFOX 104 Manual De Usuario

Start-up procedure

A) What is included in the box
SURFOX machine
u
Hand wand and connecting hose
u
Ground clamp
u
Accessory kit containing:
u
• 3 high conductivity standard cleaning pads
• 1 PTFE clamping ring
• 1 x 2.5 mm hexagonal key for changing
tungsten cleaning tips
B) Filling the reservoir
Fill the reservoir in the back of the machine with SURFOX
electrolyte solution. The reservoir holds 1.9 L of SURFOX
electrolyte solution.
Reservoir
C) Plugging in the power cord
When an extension cord is needed, use wire size 14 (AWG)
for up to 50 feet (15 meters) and size 12 (AWG) for 50 to
100 feet (15 to 30 meters).
D) Plugging in the ground clamp
Plug the ground clamp at the front of the unit. Attach the
clamp to the work piece being cleaned. The cleaning and
passivating process will not work if the part is not properly
grounded.
Ground
clamp
5
Start-up procedure
7
User's Guide SURFOX 104