LG WT25WT6H Manual Del Propietário página 68

Agua Extra (Water Plus)
Use this option to add extra water to the wash
cycle for better wash performance (stain
treatment) with large or bulky items.
• If this appliance reaches its maximum water
level, this option will have no effect.
• When Algodón/Normal (Cotton/Normal)
programme is selected, if you select this
option, programme will be changed to the
Lavado profundo (Deep Wash) programme
before starting.
Turbo Wash™ (Turbo Wash™)
Adding this option reduces the cycle time while still
providing similar wash performance to the same
cycle without this option.
• This option cannot be used with all cycles.
• This option defaults on for
Algodón/Normal (Cotton/Normal),
Pre Wash+Normal (Pre Wash+Normal) and
Lavado Rápido (Speed Wash) programmes.
Enjuague Extra (Extra Rinse)
This option will add an extra rinse to the selected
programme.
• Use this option to help ensure the removal of
detergent or bleach residue from fabrics.
• If used the liquid fabric softener, this is always
dispensed in the final rinse.
• Pressing this button twice will add two additional
rinses to the cycle.
NOTE
• You cannot select this option with the
Sólo Centrifugado (Spin Only) option and
Limpieza de la tina (Tub Clean) function.
• When Algodón/Normal (Cotton/Normal)
programme is selected, if you select this
option, programme will be change to
Lavado profundo (Deep Wash) programme
before starting.
24
Señal (Signal)
This appliance plays a melody when the wash
cycle has finished. The volume of the melody is
adjusted using this button.
• Press this function repeatedly to adjust the
volume of the signal.
• When no signal is heard, the signal is off.
• The volume settings are Low-High-Off. The
signal volume can be adjusted at any time as
long as this appliance is turned on.
Bloqueo de panel (Control Lock)
Use this function to disable the controls. This
feature can prevent children from changing
programmes or operating the appliance.
Locking the Control Panel
Press and hold the Señal (Signal) button for 3
seconds.
• and the remaining time are alternatively
shown on the display while they are locked.
When this function is set, all buttons are locked
except the Encendido/Apagado (Power)
button.
NOTE
• Turning off the power will not reset the this
function. You must deactivate this function
before you can access any other functions.
• This function does not lock the door.
Unlocking the Control Panel
Press and hold the Señal (Signal) button for 3
seconds.
• A beeper will sound and the remaining time for
the current programme will reappear on the
display.
EN