Type 1
1
Push down on the release tab on the top of
the filter cover and pull forward.
2
Open the lid and remove the lint.
3
Wash the filter with a soft brush.
4
Close the lid and then insert the lower part of
the filter into the wash drum and press down
then press the top part into position until you
hear a clicking sound.
Type 2
1
Push down on both sides of the release tab of
the filter cover and pull forward.
2
Open the lid, remove the lint and then wash
out.
3
Close the lid and then insert the lower part of
the filter into the wash drum and press the top
part into position until you hear a click sound.
EN
33